New environmental protection complete aerosol automatic filling production line

Recently, a new type of environmentally-friendly complete aerosol filling production line developed by Jiangyin City Panther Machinery Equipment Manufacturing Co., Ltd. using HFC-134a as a propellant has passed the appraisal of the national customs department. According to reports, the Institute of Filling Equipment of Panther Machinery Manufacturing Co., Ltd., after a long period of research, made propellants for HFC-134a. China has banned the use of CFCs as aerosol propellants since December 31, 1997. The new environmentally-friendly aerosol automatic filling production line developed by Panthers adopts HFC-134a, which has ozone depletion potential and potential for greenhouse effect. The value is 0, and the produced aerosol product has suitable process parameters and has the excellent properties of the VOC value product. The new environmental protection complete aerosol filling production line researched and developed by Panthers Company is composed of bottle washing, bottle washing, drying, filling and sealing, flushing gas and leak detection. The process flow is as follows: firstly, the automatic bottle unscrambler will arrange the messy bottles into bottles with the mouth upward, the bottom down, and neatly enter the bottle washing machine. After washing the outer wall with water and water, the bottle will be sprayed out after being sprayed with clean water. Enter the blower and purify it through the filter. The clean air blows the residual water in the bottle dry, through the initial temperature in the tunnel oven, temperature adjustment, cooling three areas, the initial temperature of 0 °C -325 °C to the temperature adjustment and finally to the bottle temperature of 5 °C -10 °C The entire sterilization process is only 4 minutes. Then enter the filling, under the filling on the filling under the vacuum cover, into the bottle, automatically on the valve, screw cap, sealing, vacuum pumping to the bottle there are special probe tracking, detection control, when no bottle without liquid material automatically Stop, automatic alarm. At the end of the leak detection stage, a suspended water bath test was used. When the bottle came in, the bottle was placed in the hot water and the water temperature was controlled at 5°C-55°C. After 5 minutes, the test result was known. Blow control blow dry the bottle. It is understood that the production line developed by Black Leopard Machinery and Equipment Manufacturing Co., Ltd. is currently a more advanced aerosol manufacturing equipment with environmental protection capabilities. The production line will be in Shanghai in October. At the exhibition, they met with manufacturers who produced aerosols. (Han Ruobing) ("China Packaging News")