![<?echo $_SERVER['SERVER_NAME'];?>](/template/twentyseventeen/skin/images/header.jpg)
* First of all, check whether the electrical parts have fallen off and whether the external power supply is 220V.
* Before starting the machine, make sure whether there is syrup or water in the tank. Waterless start will burn the heater and circulating motor.
* The rollers and spray pipes have been positioned and the drying fan protection net has been covered.
Boot:
Press the on/of button once, the indicator light is on, it shows that it is ready to be flushed, and the temperature of the developer will automatically rise to the set temperature after the power is turned on. At this time, the circulation system starts to operate; if the actual liquid temperature has reached the set temperature When the temperature exceeds the set temperature, the recirculating water jet system will not operate and will be in a stationary state. The system will only operate when the plate is started.
Shutdown:
Press the on/of button to turn off the indicator light, and then turn off the sprinkler system after shutting down. The drying system drive system will stop.
Entrance:
Need to develop the PS version from the entrance;
No need to develop the PS version from the b entrance;
Glue or not can be controlled by the red switch on the panel, i for glue, o for glue.
Reading of data:
Display temperature: Press the button for the development temperature once to read the development temperature. At this time, the number displayed on the display is not blinking, that is, the actual temperature of the syrup. Then press the temperature button again, the number displayed on the display is flashing, that is, the user's set temperature.
Bake out temperature: just like the temperature, press this button once, when the word is not flashing, it is the actual drying temperature; when you press it again, the word flashes, which indicates the temperature that the user requires to set.
Version: Press this button once to display the number of sheets that have been washed. If you want to return to zero, press this button once and then press it three times quickly. The version number will be zero.
Speed: Press this button once, the flashing number on the display is the user's setting speed, the number is 20-40 adjustable, 20 is the fastest, and 40 is the slowest. Press this button once, and then press fast three times. The displayed flashing number is the flow set by the user, that is, the time when the plate is completely left to leave the plate, and if the plate is not completely out of the machine. If it stops, it means that the user setting process is too short. If the printing plate has completely left for a long time, but the machine is still running, the process is set too long.
Supplement: Press this key once, the displayed flashing number is the user's setting for each pot to automatically replenish the potion unit. Flashing digital users can increase or decrease as needed. Press three times in rapid succession, that is, manually replenish, and the motor will start to add the medicine.
Reversal: Press this key once to stop the ongoing process. Just as if resetting, the version that advances after five seconds will fall back.
Changes to the data:
Change the temperature: Press the temperature key to display the number flashing, then press + or - to display the number that changes with the user's needs, if you press the accelerator key and + or - key, the change in the displayed number, that is, multiples of Change to achieve rapid change.
Changing the baking temperature, speed, flow, and replenishment methods are the same as the temperature display mode. The operation method is the same.