Inkjet printer drive belt comes off

An inkjet printer has been used normally. After the printer has been moved to the printer once, the print head cannot be automatically moved. After opening the printer cover, the drive belt of the printer is loose. How can this be solved?

This problem should be caused by the abnormal closing of the printer before you move the printer. As a result, the print head does not move to the right fixed position. The vibration in the movement causes the printer drive belt to disengage from the guide gear. It is recommended that you manually drive the belt. Reinstall the guide gear, the general problem can be solved. The specific method is as follows: Open the fuselage cover of the printer, place the drive belt on the left side of the printer in the correct position on the power gear, stretch the transmission belt by the right hand, and make the drive belt gradually turn from the side to the guide gear and in the middle position. After the drive belt is reset, the print head is turned by hand. If it can be moved normally, it can be used normally. In addition, after installing the drive belt, the print head needs to be re-cooled to avoid the problem of misalignment of the print image. Computer connection, start the printer, double-click My Computer/Control Panel/Printers and Faxes, right-click the appropriate printer icon, select Printing Preferences, click Maintain/Print Head Alignment, General issues can be resolved.