Postpress binding processing considerations

Only carefully designed and arranged for India and India at the beginning can we ensure the consistency of printing and postpress processing. In production, the following points should be noted:

1. Folding Since the ink color on digital prints is only attached to the surface of the paper, the folding process is prone to cracking. Therefore, it is best to press the folds before folding.

2. Laminating the film on the surface of digital prints, especially after printing a large area on the ground, will help the printing process, especially for cutting or packaging. Protective effects. It is not necessarily beneficial to apply a single-sided film to a double-sided print, because one side of the uncoated film may be more susceptible to peeling of the printed toner due to friction.

3. Saddle Stitching Saddle stitching is a good choice for most digital prints, and is particularly suitable for the binding of thinner books such as guides, booklets and brochures. The binding method is economical and practical, and can be carried out online with other processing methods. Simultaneous post-press processing of folding, folding, binding, and online cutting can be performed, which can provide guarantee for fast delivery required by digital printing.

4. When designing flat-books, the first thing to note is that there should be enough room for binding between the order and the text. For example, when the O-spiral thread has a 3:1 ratio (3 holes per inch), A 3/8 inch blank should be set aside; when the ratio is 2:1, a 1/2 inch blank is left. Most computer design programs do not consider slight changes in the thickness of paper after printing. In digital printing, color printing on the surface of a paper causes a change in the thickness of the printed sheet, and when several pages of digital printed sheets are bound, the cumulative thickness Changes may make the computer's carefully calculated binding size meaningless.

5. Adhesive Bonding As with adhesive-bonded adhesives for wireless adhesives, the adhesive binding of digital prints also requires consideration of the amount of trimming. In addition to leaving a 1/8-inch back allowance on the back of the book, a 1/8-inch cutout is also required on the other three sides of the book. In addition, a 1/4-inch glue area should be left in the lower part of the book cover to prevent the glue from seeping into the next book in the binding process. The wireless glue binding process also requires printing of the bleeding cover should be larger than the size of the text. a little.

6. Wireless adhesive binding hardcover The key to the hardcover process is how to securely bind the book block to the hard case to produce books that can be stored for long periods of time. Although the cost and time required for adhesive binding of wireless glue seem to be somewhat out of proportion to the digital printing for the short-run printing market, some post-print binding companies prefabricate different colors, styles, and differences commonly used in digital printing. The size of the hardcover bookcase is used by digital printers, so the adhesive binding of wireless glue has also become a common binding method for digital printing.