![<?echo $_SERVER['SERVER_NAME'];?>](/template/twentyseventeen/skin/images/header.jpg)
1. The image scanning level is insufficient.
2. The image scan ratio calculation is incorrect.
3. The level of the inserted image is insufficient, and the cutting is not accurate.
4. Place the wrong image.
5. Use the low-resolution diagram as the output.
6. The RGB image is output without being converted to CMYK.
7. The image decontamination is not complete.
8. It is inappropriate to retreat the ground. Start with a white border.
9. No word output.
10. Use typo output.
11. Use damaged word output.
12. Output damaged manuscripts.
13. Scan with the wrong picture.
14. Use the damaged software for output.
15. The black characters did not do Overprint.
16. There is no blue version on the black field.
17. The color output is wrong, the spot color is out of four colors, and the spot color is out of four colors.
18. The yin film produced a yang film, or vice versa.
19. The direction of the output medicine film is wrong. The medicine film wants to go up and down, and up and down.
20. The scanning of the same type of pictures is not uniform, so it is necessary to redo the scanning and output process many times.
21. The color correction of the image is added or subtracted incorrectly.
22. The highlight and dark bits are wrong when scanning.
23. The RGB color patches in the manuscript are output without being converted to CMYK.
24. The number of outputs is wrong. Three sets are required for one set, but only three sets are required for three sets.
25. Repeatedly export the non-forest that has been exported.
26. The zoom ratio is wrong during output.
27. The size of the non-forest is insufficient, and the A3 draft uses A4 non-forest.
28. Wrong setting of straightness or wrong setting of Printerdrive.
29. The wrong file is output, but the draft A is required but the draft B is issued.
30. The number of pages in error, but the page 5 is out of page 6.
31. There are more pages. If you want page 5, you have page 5 and page 6.
32. Use the wrong angle to output.
33. Use the wrong net output.
34. The resolution setting is incorrect during scanning.
35. The density of the output machine is too high or too low, which results in the outlets being too fat or too thin.
36. The four-color film cannot register the needle position.
37. There is no trapping.
38. Too much trapping is done, and there are exposed edges between the color blocks.
39. Only the black version of the corner stitch is available.
40. The color blocks cannot be registered with the original color version.
41. The color of the supplementary scan is not the same as the original image, and the color correction and output must be repeated.
42. The filming machine runs out.
43. The filming machine scrapes non-forest.
44. The syrup of the tablets is too thick or too thin, affecting the non-forest outlets.
45. The temperature of the punching machine is too high or too low, affecting the non-forest outlets.
46. ​​Use the non-forest output that has run out.
47. The system crashes and damages the finished manuscript.
48. The system has a virus and damages the prepared manuscript.
49. Use damaged MO, CD-ROM to store images.
50. Loss of guests' lights, manuscripts, etc.
Mobile Whiteboard,Whiteboard With Wheels,Mobile Magnetic Whiteboard,Mobile Magnetic Glass Board
WENYANG STATIONERY MANUFACTURING CO.,LTD. , https://www.marvelousboard.com